
AR482G
*This product will require programming in order to operate. Please contact us for further details.
Clear Voice, Versatile Application
The Hytera AR482GU, DMR for Amateur Radio, is an easy-to-use & program DMR(ETSI open Standard) with Analog operation portable.
A built in digital compass and GPS tracking with waypoint markers/back-track locations allow you to roam freely.
Technical Specifications
General
- Frequency Range
- UHF: 350-470MHz
- Channel Capacity
- 256
- Zone Capacity
- 16
- Channel Spacing
- 25/12.5KHz
- Operating Voltage
- 7.4V
- Battery
- 2200mAh (Li-Ion)
- Battery Life (5/5/90 )
- Analog/Digital: 12/16 hours
- Weight
- 308g
- Dimensions
- 117*55*37mm
- Frequency Stability
- ±0.5ppm
- Antenna Impedance
- 50Ω
Receiver
- Sensitivity (Digital)
- 0.22μV / BER 5%
- Sensitivity (Analog)
- 0.22μV (Typical) (12dB SIN AD) 0.4μV (20dB SIN AD) 0.22μV (12dB SIN AD)
- Adjacent Selectivity TIA-603 / ETSI
- 60dB @ 12.5KHz / 70dB @ 25KHz
- Spurious Response Rejection TIA-603 / ETSI
- 70dB @ 12/25KHz / 70dB @ 12/25KHz
- Inter-modulation TIA-603 / ETSI
- 65dB @ 12.5/25KHz / 70dB @ 12.5/25KHz
- Hum & Noise
- 40dB @ 12.5KHz 45dB @ 25KHz
- Rated Audio Power Output
- 0.5W
- Rated Audio Distortion
- ≤3%
- Audio Response
- +1 ~ -3dB
- Conducted Spurious Emission
- <-57dBm
Transmitter
- RF Power Output
- UHF High power: 4W UHF Low power: 1W
- FM Modulation
- 11K0F3E @ 12.5KHz 16K0F3E @ 25KHz
- 4FSK Digital Modulation
- 12.5KHz Data Only: 7K60FXD 12.5KHz Data & Voice: 7K60FXW
- Conducted/Radiated Emission
- -36dBm <1GHz, -30dBm >1GHz
- Modulation Limiting
- ±2.5KHz @ 12.5KHz ±5.0KHz @ 25KHz
- FM Hum & Noise
- 40dB @ 12.5KHz 45dB @ 25KHz
- Adjacent Channel Power
- 60dB @ 12.5KHz, 70dB @25KHz
- Audio Response
- +1~3dB
- Audio Distortion
- ≤3%
- Digital Vocoder Type
- AMBE++
- Digital Protocol
- ETSI-TS102 361-1,-2,-3
Environmental
- Operating Temperature
- -30°C~ +60°C
- Storage Temperature
- -40°C~ +85°C
- ESD
- IEC 61000-4-2 (Level 4) ±8kV (Contact) ±15kV (Air)
- Dustproof & Waterproof
- IP54 Standard
- Humidity
- Per MIL-STD-810 G Standard
- Shock & Vibration
- Per MIL-STD-810 G Standard